PRODUCT

Combination Air Dryer

Capacity range : 10~350 m3/min
Pressure range : 0.4~ 1.0MPa (4~ 10barg)
Max. inlet temperature : 50 ℃
Max. ambient temperature : 45 ℃
Min. ambient temperature : 5 ℃
Max. cooling water temperature : 35 ℃
Cooling type : air-cooled / water-cooled
Power supply : 220V/1Ph/ 50Hz ( RSC*- 100 ~ RSC*- 150)
380V/ 3Ph/ 50Hz ( RSC*-200 ~ RSC*-3500)
Refrigerant : R407C (R22 is optional)
PDP : -40℃ , -70℃

Rated condition:
Working pressure : 0.7MPa
Inlet temperature : 38 ℃
Ambient temperature : 38 ℃
PDP : - 40 ℃
Cooling water temperature : 30 ℃
Purge air loss : < 3 %

Other :
For pressure above 1.0MPa please contact us

Reliable design
Our patented flow is cryogenic adsorption and cold regeneration.
Porcelain ball i n the bottom of tower can make more balance air flow, which not only prevent desiccant in the bottom from soaking, but also prolong desiccant life.
Special designed stainless steel dust strainer can greatly reduce pressure loss.
Special customized high efficiency desiccant can ensure perfect dew point .
Standard configuration for all range is high efficiency poppet valve, which reliability and pressure loss are much more superior to thin film vale, solenoid valve and etc.

Energy saving and environmental protection
Heat exchanger is with high efficiency plate-fin structure which is imported from the West ;
Pre-cooler recovered more than 90% cooling capacity, and reduced load of evaporator efficiently, so total energy consumption is only 70% of congeneric products. ( DPOS: Dew Point Operation System)
DPOS energy saving system can prolong adsorption time and reduce total energy consumption to less than 75%, even in the fluctuate load condition.
All the adsorption tower, valves, piping and etc. are treated with refrigeration heat preservation.
Environmental protection refrigerant for all range products, which compliance with different environmental laws of different countries.

Various controller types
Reliable PLC controller for whole range.
Optional: Siemens, ABB brand of PLC, touch screen and etc.
Can meet different requirement from RS485 I/ O, Profibus, Modbus, to Ethernet .

Technical Specification of RSCF-30~RSCF-400 Series Combined (Air cooled type) Regeneration Compressed Air Dryer

Model Nominal Volume Flow Electrical Supply Nominal Power Air Connections Dimensions in mm Approx Weight Drain Connections
RSCF (Nm3/min) V/PH/Hz kw mm L W H kg mm
RSCF-30 3.0 220V/1PH/50HZ 0.81 DN25 1340 750 1775 585 DN15
RSCF-60 6.0 220V/1PH/50HZ 1.71 DN40 1500 850 2270 870 DN15
RSCF-100 10.0 380V/3PH/50HZ 2.91 DN50 1700 950 2270 1140 DN15
RSCF-150 15.0 380V/3PH/50HZ 3.85 DN65 1920 1150 2170 1800 DN15
RSCF-200 20.0 380V/3PH/50HZ 4.33 DN65 2200 1350 2310 2200 DN15
RSCF-300 30.0 380V/3PH/50HZ 6.98 DN80 2500 1400 2450 2600 DN15
RSCF-400 40.0 380V/3PH/50HZ 8.25 DN100 2600 1500 2510 2750 DN15


Technical Specification of RSCS-150~RSCS-1800 Series Combined (Water cooled type) Regeneration Compressed Air Dryer

Model Nominal Volume Flow Electrical Supply Nominal Power Air Connections Dimensions in mm Approx Weight Drain Connections
RSCS (Nm3/min) V/PH/Hz kw mm L W H kg mm
RSCS-150 15.0 380V/3PH/50HZ 7.3 DN50 1750 1600 2138 1450 Rc3/4”
RSCS-200 20.0 380V/3PH/50HZ 8.96 DN65 1750 1600 2113 1650 Rc3/4”
RSCS-250 25.0 380V/3PH/50HZ 10.8 DN65 1800 1600 2157 1850 Rc1”
RSCS-300 30.0 380V/3PH/50HZ 13.1 DN80 1850 1600 2132 2300 Rc1-1/4”
RSCS-400 40.0 380V/3PH/50HZ 17.5 DN100 2200 1600 2392 2800 Rc1-1/4”
RSCS-500 50.0 380V/3PH/50HZ 21.3 DN125 2300 1600 2350 3000 Rc1-1/4”
RSCS-600 60.0 380V/3PH/50HZ 25.7 DN125 2350 1600 2277 3300 Rc1-1/2”
RSCS-800 80.0 380V/3PH/50HZ 34.1 DN150 For more info., Pls contact RISHENG Rc1-1/2”
RSCS-1000 100.0 380V/3PH/50HZ 44.9 DN150 Rc1-1/2”
RSCS-1200 120.0 380V/3PH/50HZ 54.7 DN150 Rc1-1/2”
RSCS-1500 150.0 380V/3PH/50HZ 75.7 DN200 Rc1-1/2”
RSCS-1800 180.0 380V/3PH/50HZ 90.9 DN200 Rc1-1/2”