Heated Blower Zero Loss Adsorption Dryer
Capacity range : 18~200 m3/min
Pressure range : 0.5~1.0Mpa(4~10barg)
Max. inlet temperature : 45 ℃
Max. condition for blower suction : 40 ℃ (RH=65%)
Power supply : 380V/3Ph/50Hz
Work cycle : 8h
Pressure dew point : -20 ℃ , -40 ℃ , - 70℃
Rated condition :
Working pressure : 0.7Mpa
Cooling water temperature: 32℃
Inlet temperature : 38 ℃
PDP : -40 ℃
Other :
Inlet required for blower suction:38℃(RH=65%)
Please contact us for higher flow and operating pressure.
Technical Specification of RSXB-180ZP~RSXB-2000ZP Series Zero Loss Blower Heated Desiccant Dryer
Rated Conditions | Working Range | Avaliable |
Working pressure: 0.7MPag / 100psig | Max. working pressure: 1.0MPag / 145psig | Higher pressure above 1.0MPag / 145psig |
Inlet temp.: 38℃ / 90℉ | Max. inlet temperature: 45℃ / 113℉ | PDP -20℃ / -4℉ and -70℃ / -100℉ |
Cooling water temp.: 32 ℃ / 100℉ | Max. Cooling water temp.: 35℃ / 95℉ | Higher capacity |
PDP: -40℃ / -40℉ | Stainess steel vessel or piping | |
GB,ASME,PED,etc. vessels |
Correction Factors
Actual flow rate = Air flow at nominal condition x KAx KB
For higher pressure, flow and lower dew point (-70°C),
please consult factory